Kramer Electronics VM-24H User Manual
Page 8
VM-24H - Overview
5
VM
-2
4
H
–
O
v
e
rv
ie
w
5
Figure 1: VM-24H 2 Input 1:4 HDMI Distributor Front Panel
#
Feature
Function
1
IR Receiver
The red LED is illuminated when receiving signals from the Kramer infrared remote control transmitter
2
POWER Switch
Illuminated switch for turning the unit ON or OFF
3
SELECT IN 1 Button
Press to select source 1 and distribute this signal to the outputs
4
SELECT IN 2 Button
Press to select source 2 and distribute this signal to the outputs
5
EDID READ Button
Press, after pressing the EDID SELECT button, to acquire the EDID Press to show the EDID status
6
EDID SELECT Button
Select the EDID mode (One Output, Auto-mix or Default)
7
OUTPUT STATUS 1-4
LEDs
LEDs light when an output(s) is connected and active; LEDs flash to indicate the type of EDID
acquired (see
) or when connecting a non-HDCP display while providing HDCP content to
the VM-24H