Kramer Electronics tp-219hd - Manual (Page 7)

Your XGA/HD Line Transmitter/Switcher and Receiver/DA
5
4 Your XGA/HD Line Transmitter/Switcher and Receiver/DA
This section describes the:
• TP-219HD XGA/HD – Line Transmitter/Switcher, see section
4.1
• TP-220HD XGA/HD – Line Receiver/DA, see section
4.2
4.1 Your TP-219HD
Figure 1 and Table 1 define the TP-219HD:
1 1
6
6
2 2 4 4 3 3
5
5
Figure 1: TP-219HD XGA/HD Line Transmitter/Switcher
Table 1: TP-219HD XGA/HD Line Transmitter/Switcher Features
# Feature Function
1 LINE OUT RJ-45 Connector Connect
1
to the LINE IN RJ-45 connector on the TP-220HD
2 INPUT 1 15-pin HD Connector Connect to the first XGA/HD source
3 INPUT 2 15-pin HD Connector Connect to the second XGA/HD source
4 12V DC +12V DC connector for powering the unit
5 INPUT SELECTOR button Press to select IN 2; release to select IN 1
6 ON LED Illuminates when receiving power
1 Using a UTP CAT5 cable with RJ-45 connectors at both ends (the PINOUT is defined in Table 5 and Figure 7 )