Kramer Electronics VP-28 - Manual (Page 26)

22 VP-28 - Operating the VP-28 Remotely
7.6 Changing the Audio Levels
To change the audio levels:
• Click, hold and slide on the required slider or click the up and down arrows
as shown in
Figure 15 .
The volume level changes accordingly.
Figure 15: Changing the Audio Levels
7.7 Muting Audio and Selecting the Talkover or Mix Audio
Modes
Figure 16: Muting Audio and Selecting the Talkover and Mix Modes
To mute the audio:
• Select the Mute check box.
The Master audio is muted.
Note: The Mic input is not muted.
To select the Talkover and Mix audio modes:
1. Select the Talkover check box.
The Talkover mode is selected and the presence of a microphone signal will
reduce the level of the master audio temporarily.
2. Select the Mix check box.