Kramer Electronics VP-28 - Manual (Page 3)

VP-28 – Contents i
Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 3
2.3 Recycling Kramer Products 3
3 Overview 4
3.1 Defining the VP-28 Presentation Switcher 5
4 Installing the VP-28 in a Rack 8
5 Connecting the VP-28 9
5.1 Connecting a Serial Controller to the VP-28 10
5.2 Connecting to the VP-28 via Ethernet 11
5.3 Connecting a Balanced/Unbalanced Stereo Audio Output 13
6 Operating the VP-28 14
6.1 Operating the Combined 5 x 1 Switching Group 14
6.2 Operating the Combined 14 x 1 Master Audio Switching Group 14
6.3 Locking the Front Panel 15
6.4 Resetting the VP-28 to the Factory Default 16
7 Operating the VP-28 Remotely 17
7.1 The Controller Software Menu Bar 19
7.2 Connecting to the Device 19
7.3 Switching an Input to the Output of the Group 20
7.4 Selecting a Master Audio Input 20
7.5 Operating the Combined 5 x 1 HDMI/DP Switching Group 21
7.6 Changing the Audio Levels 22
7.7 Muting Audio and Selecting the Talkover or Mix Audio Modes 22
7.8 Changing the Input Button Icons and Labels 23
7.9 Upgrading the Firmware 24
7.10 Setting the IP Network Parameters 24
8 Technical Specifications 26
9 Default Parameters 28
9.1 Default Communication Parameters 28
9.2 Default Video/Audio Parameters 28
10 Protocol 3000 Control Commands 29
11 Kramer Protocol 31
11.1 Protocol Output Definitions 31
11.2 Kramer Protocol 3000 31