Kramer Electronics VP-31KSi - Manual (Page 12)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VP-31KSi 3x1 UXGA/Audio STEP-IN Switcher
8
4.1 Using the IR Transmitter for the VP-31KSi
You can use the RC-IR3 IR transmitter to operate the machine via the built-in IR
receiver on the front panel.
5 Connecting the VP-31KSi 3x1 UXGA/Audio STEP-IN Switcher
i
Always switch off the power to each device before connecting it to your
VP-31KSi. After connecting your VP-31KSi, connect its power and then
switch on the power to each device.
Figure 3: Connecting the VP-31KSi