Kramer Electronics VP-84ETH - Manual (Page 23)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the RGBHV / Balanced Audio Matrix Switcher
20
6. Select Use the following IP address, and fill in the details as shown in
Figure 13.
7. Click OK.
Figure 13: Internet Protocol (TCP/IP) Properties Window
6.4.2 Connecting via a Straight-Through Cable
You can connect the ETHERNET of the VP-88ETH to the Ethernet port on a
network hub or network router, via a straight-through cable with RJ-45
connectors.
6.4.3 Configuring the Ethernet Port
After connecting the Ethernet port, you have to install and configure it.
Two types of Ethernet ports are available on the VP-88ETH:
The FC-11 Ethernet port 1
The Lantronix Ethernet port 1
For detailed instructions on how to install and configure your Ethernet port,
see the “Ethernet Configuration (Lantronix) guide.pdf” file or the “Ethernet
Configuration (FC-11) guide.pdf” on our Web site:
http://www.kramerelectronics.com
1 The FC-11 Ethernet port can be identified by an “FC-11” sticker located next to the LAN port on the rear side of the
machine. Otherwise, the Lantronix Ethernet port type is installed in the machine