Kramer Electronics VP-84ETH - Manual (Page 24)

Connecting the RGBHV / Balanced Audio Matrix Switcher
21
6.5 Setting the VP-88ETH Dipswitches
This section describes the machine set-up and dipswitch selection.
Figure 14 illustrates the factory default dipswitches and Table 3 describes
them.
OFF
ON
Figure 14: VP-88ETH Dipswitches
Table 3: Dipswitch Settings
DIPS Function Description
1, 2, 3 Self Address Determines the position of the machine in the input expansion configuration
(in the factory default, these DIPs are set to ON)
4 RS-485 TERM ON for RS-485 Line Termination (factory default)
OFF for no RS-485 Line Termination
5 Reply ON enables reply from switcher to PC (factory default)
OFF disables reply from switcher to PC
6, 7 RESERVED Set to ON (factory default)
8 RS-232 \ RS-485 ON enables RS-232 communication between switcher and PC (factory
default)
OFF disables reply from switcher to PC