Kramer Electronics VP-747 - Manual (Page 15)

VP-747 Control Software - Operating the Control Software 13
5 Operating the Control Software
This section gives a short overview and some examples for using the VP-747
Control Software.
Operating the VP-747 with the Control Software is the same as operating the unit
from the front panel or using the OSD. For more information, see the VP-747 User
Manual.
5.1 Selecting Channels
To select a preview input:
• Click on the required Preview button to activate it (in this example, Input 5).
Channel 5 is selected, the button changes to green as shown in
Figure 9
and Channel 5 is switched to PREVIEW OUT
To choose a program input:
• Click on the required Program button to activate it (in this example, Input 1).
Channel 1 is selected, the button changes to green as shown in
Figure 9
and Channel 1 is switched to PROGRAM OUT
Figure 9: Input Selection