Kramer Electronics VP-747 - Manual (Page 16)

14 VP-747 Control Software - Operating the Control Software
5.2 Using the Display Presets
The Preview and Program outputs can each be configured using the presets: full,
PIP, P+P and split.
• Full shows the full-screen display of the chosen Input Switch
• PIP shows the full display of the chosen Input Switch with an inserted image
selected from the PIP Input Switch. The user can relocate the inserted image
by dragging the window and resize it by dragging the corner of the window
• P+P shows the chosen Input Switch display side-by-side with the chosen
PIP Input Switch display. The displays are equal sized and do not cover the
full screen. They cannot be dragged or resized
• Split shows the two images side-by-side on the full screen. There may be
distortion
1. Activate the presets in the following ways:
 Navigate to Menu > Display > Presets and choose the desired preset
or
 Click one of the preset tool bar command buttons
Figure 10 shows a PIP window.
Figure 10: PIP Window
2. Choose the second source (B) by selecting an input from the PIP Inputs
dropdown.
3. PIP and P+P screens can be resized by dragging the dotted handles.