Kramer Electronics VP-747 - Manual (Page 42)

VP-747 - Operating the VP-747 37
8.1.5.3 Logo Download
Use one of the rear panel USB ports to download a custom Logo to the
VP-747. To download a new logo:
1. Load the JPEG (JPEG files are recognized up to 2048x1536) images to a
USB memory stick.
2. Insert the memory stick into one of the USB ports.
3. In the Utility menu, select Misc Settings and set Logo to Custom.
4. In the Misc menu, select Logo Download and press Enter.
5. If a list of the available images is not
6. Select the desired image and press Enter. When the download is complete
(this takes several seconds), the list of images no longer shows.
shown, press TAKE, and then repeat
step #4 above.
8.1.5.4 Save/Recall/Erase Setting Commands
You can save/recall up to 8 settings. In each setting you can preserve the entire
machine’s settings. All parameters are saved/recalled, including the Universal Input
configurations, ProcAmp settings, output resolutions, and so on. You can also erase
a single setting or all of them.
This is useful, for example, for configuring the machine for multiple presentations. Up to 8
presentation configurations can be saved in the machine’s memory