Kramer Electronics VP-747 - Manual (Page 48)

VP-747 - Technical Specifications 43
9 Technical Specifications
INPUTS: 2 HDMI/DVI inputs connectors (HDMI and HDCP version 1.2) on DVI connectors
8 sets of universal BNC connectors: R/Pr, G/Y/CV, B/Pb/C, Hs/Cs, and Vs, each
programmable for use as CV, YC, RGB, YCbCr, YPbPr, RGBS or RGBHV
PREVIEW
OUTPUT:
1 x HDMI/DVI input connector (HDMI and HDCP version 1.2) on a DVI connector
1 x VGA (VGA through UXGA) on a 15-pin HD connector
1 x RGBHV/YPbPr on BNC connectors
PROGRAM
OUTPUT:
1 x HDMI/DVI input connector (HDMI version 1.2 and HDCP version 1.2) on a DVI
connector
1 x VGA (VGA through UXGA) on a 15-pin HD connector
1 x RGBHV/YPbPr on BNC connectors
OUTPUT
RESOLUTIONS:
640x480 60Hz, 640x480 75Hz, 800x600 50Hz, 800x600 60Hz, 800x600 75Hz,
832x624 75Hz, 852x480 60Hz, 1024x768 50Hz, 1024x768 60Hz, 1024x768
75Hz, 1280x720 60Hz, 1280x768 50Hz, 1280x768 60Hz, 1280x800 60Hz,
1280x1024 50Hz, 1280x1024 60Hz, 1280x1024 75Hz, 1366x768 50Hz, 1366x768
60Hz, 1400x1050 50Hz, 1400x1050 60Hz, 1440x900 60Hz, 1600x1200 50Hz,
1600x1200 60Hz, 1680x1050 60Hz, 1920x1080 50Hz, 1920x1080 60Hz,
1920x1200 60Hz, 480px60Hz, 576p, 720p 50Hz, 720p 60Hz, 1080i 50Hz, 1080i
60Hz, 1080p 50Hz, 1080p 60Hz, 1080p 24Hz (for HDMI), 480px59.94Hz,
720px59.94Hz, 1080ix59.94Hz, 1080px23.97Hz, 1080px29.97Hz,
1080px59.94Hz or one of 4 Custom resolutions
For the most up-to-date resolution list, go to our Web site at http://www.kramerelectronics.com
CONTROLS: Front panel buttons, high contrast LCD, IR remote control, Ethernet, AUDIO
CONTROL, RS-232 and RS-485 for optional T-bar remote controller
ADDITIONAL
CONTROLS:
Freeze, zoom, different selectable vertical refresh rates, ProcAmp control, output
image scaling, Picture-In-Picture, and aspect ratio change
POWER
SOURCE:
100-240 VAC, 50/60Hz 65VA
DIMENSIONS: 19” (W), 9.3” (D), 3RU (H) rack mountable
WEIGHT: 5.5kg. (12.2lbs) approx.
ACCESSORIES: IR remote control, power cord, rack “ears”, and null-modem adapter
OPTIONS:
VP-747T control panel
Specifications are subject to change without notice at http://www.kramerelectronics.com
9.1 Default Communication Parameters
RS-232 Communication Protocol
Baud Rate: 9600 / 115200
Data Bits: 8
Stop Bits: 1
Parity: None
Command Format: HEX
Example (select channel 1 as program input): Y01510CR
Ethernet
IP Address: 192.168.1.39
TCP Port Number: 5000
Network Mask: 255.255.255.0
Default Gateway: 192.168.1.1