Kramer Electronics VP-8x8TP - Manual (Page 24)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-8x8TP 8x8 UXGA/Audio Matrix Switcher
20
2. Press the lit TAKE button to toggle from the Confirm mode back to the At
Once mode.
Actions no longer require user confirmation and the TAKE button no longer
lights.
7.3.2 Confirming a Switching Action
To confirm a switching configuration change (in the Confirm mode):
1. Press an OUTPUT-INPUT combination.
The corresponding 7-segment display flashes with the new value. The TAKE
button also flashes.
2. Press the flashing TAKE button to confirm the action.
The corresponding 7-segment display no longer flashes. The TAKE button
flashes.
To confirm several actions (in the Confirm mode):
1. Press each OUTPUT-INPUT combination in sequence.
The corresponding 7-segment display flashes. The TAKE button also flashes.
2. Press the flashing TAKE button to confirm all the actions.
The corresponding 7-segment display no longer flashes. The TAKE button
lights.
7.4 Storing/Recalling Input-Output Configurations
You can store and recall up to 16 input-output configuration setups
1
Figure 12
using the eight
OUTPUT buttons and the eight INPUT buttons on the front panel (see ).
Figure 12: Storing and Recalling using the Input-Output Buttons
7.4.1 Storing an Input-Output Configuration
To store the current status in memory:
1. Press the STO button.
The STO button flashes.
2. Press one of the 16 INPUT/OUTPUT buttons (this will be the setup # in
which the current status is stored).
3. If in the Confirm mode, press the flashing TAKE button to confirm the action.
The memory stores the data at that reference.
1 You can store and recall audio and video configurations and audio gain data