Kramer Electronics VP-8x8TP - Manual (Page 29)

Operating the VP-8x8TP Remotely via your Web Browser
25
25
9.1 Connecting to the VP-8x8TP via your Browser
Make sure that your PC is connected via a network to the VP-8x8TP and do the
following:
1. Open your Internet browser.
2. Enter the unit’s IP number (for the default IP address, see
Table 2 ) or name in
the Address bar of your browser.
If you are using DHCP, you have to enter the name.
Figure 16: Entering the IP Number in the Address Bar
The Loading page appears.
Figure 17: The Loading Page
The first time that you run the Kramer applet a security warning appears.