1 toggling between the at once and confirm modes, 2 confirming a switching action, 4 switching actions – Kramer Electronics VS-1616D User Manual

Page 25: Toggling between the at once and confirm modes, Confirming a switching action, Switching actions, N 7.3.2

Advertising
background image

Operating Your Video Matrix Switcher

21

21

•

Pressing an OUT-IN combination implements the switch without further

user confirmation

•

You save time as execution is immediate and actions require no user confirmation

•

No protection is offered to correct an erroneous action

In the Confirm mode:

•

The TAKE button lights

•

You enter an action and then confirm it by pressing the TAKE button

•

Every action requires user confirmation, protecting against erroneous actions

•

Execution is postponed until you confirm the action

1

7.3.1 Toggling between the At Once and Confirm Modes

To toggle between the At Once and Confirm modes:
Note:
If the TAKE button is flashing you cannot toggle between the At Once and

Confirm modes. A flashing TAKE button indicates that an action is currently

pending confirmation.
1. Press TAKE to toggle between the At Once mode and the Confirm mode.

The TAKE button lights and actions now require user confirmation.

2. Press the lit TAKE button to toggle from the Confirm mode back to the At

Once mode.

The TAKE button is no longer lit and actions no longer require user

confirmation.

7.3.2 Confirming a Switching Action

Actions only require confirmation when the device is in the Confirm mode.
To confirm a switching action:

1. Using the numeric keypad, enter an output-input combination.

The TAKE button flashes.

2. Press the flashing TAKE button to confirm the action.

The action is confirmed and the TAKE button lights.

7.4 Switching Actions

This section describes how to:

•

Switch one input to one output (see

Section 7.4.1

•

Switch several inputs to several outputs (see

)

Section 7.4.2

•

Turn off several outputs (see

)

Section 7.4.3

)

1 Failure to press the TAKE button within a few seconds results in the action timing out automatically

Advertising