Kramer Electronics VS-3232DN - Manual (Page 70)

66 VS-3232DN - Communication Protocols
16 Communication Protocols
16.1 Protocol 3000
The VS-3232DN can be operated using serial commands from a PC, remote
controller or touch screen using the Kramer Protocol 3000.
This section describes the:
•
Kramer Protocol 3000 syntax (see Section 16.1.1
•
Kramer Protocol 3000 commands (see
)
Section 16.1.8
16.1.1 Kramer Protocol 3000 Syntax
)
16.1.1.1 Host Message Format
Start Address (optional) Body Delimiter
# device_id@ Message CR
16.1.1.2 Simple Command
Command string with only one command without addressing:
Start Body Delimiter
# Command SP Parameter_1,Parameter_2,… CR
16.1.1.3 Command String
Formal syntax with commands concatenation and addressing:
Start Address Body Delimiter
# device_id@ Command_1 Parameter1_1,Parameter1_2,…|
Command_2 Parameter2_1,Parameter2_2,…|
Command_3
Parameter3_1,Parameter3_2,…|… CR
16.1.2 Device Message Format
Start Address (optional) Body delimiter
~ device_id@ Message CR LF
16.1.2.1 Device Long Response
Echoing command:
Start Address (optional) Body Delimiter
~ device_id@ Command SP [Param1 ,Param2 …] result CR LF
CR = Carriage return (ASCII 13 = 0x0D)