Kramer Electronics VS-88DTP - Manual (Page 25)

VS-88DTP - Operating the VS-88DTP 21
4. Press the SELECT OUT button from which the first EDID will be acquired
(for example, OUT 1).
5. Press the SELECT IN 1 button again.
The IN 1 button ceases to flash.
6. Press another SELECT IN to which the next EDID will be copied (for
example, IN 3).
The selected input number flashes on the display.
7. Press the SELECT OUT button from which the next EDID will be acquired
(for example, OUT 6).
8. Press the SELECT IN 3 button again.
The IN 3 button ceases to flash.
9. Press the SELECT IN buttons to which you want to copy the EDID (for
example, IN 1 and IN 3).
10. Make sure that the relevant input numbers flash on the display.
11. Press the EDID button.
The process is complete when the display returns to normal.
6.5.3 Acquiring the Default EDID
To reset to the default EDID, do the following:
1. Press the EDID button.
The EDID button flashes.
2. Press the SELECT IN button to which the EDID will be copied.
The selected input number flashes on the display.
3. Press the OFF button until a “0” (zero) appears on the display.
4. Press the EDID button.
The process is complete when the display returns to normal.