Kramer Electronics FC-24ETH - Manual (Page 16)

12 Initial Configuration and Use Overview
5 Initial Configuration and Use Overview
This chapter provides an overview of the initial configuration and basic operation
of the FC-21ETH, FC-22ETH and FC-24ETH. The chapter comprises:

Configuring the FC-21ETH, FC-22ETH and FC-24ETH (see Section
5.1
)

Configuring a virtual port on the PC (see Section
5.2
)

Configuring an Ethernet connection on the PC (see Section 5.3 )
In the following description the FC-24ETH is used as an example. The same
principles apply to the FC-21ETH and FC-22ETH.
Figure 7: Connecting the FC-24ETH for Initial Configuration
5.1 Configuring the FC-21ETH, FC-22ETH and FC-24ETH
To configure the FC-21ETH, FC-22ETH and FC-24ETH:
1. Connect the Ethernet port on the rear panel of the FC-21ETH, FC-22ETH
and FC-24ETH to a PC either directly or via a LAN, (see Section
6.1
).