Kramer Electronics FC-24ETH - Manual (Page 18)

14 Initial Configuration and Use Overview
5.2 Configuring a Virtual Port on the PC
If the control application cannot work with an Ethernet driver, download the Kramer
VSPM from our Web site to set a virtual port for each local port on your
FC-21ETH, FC-22ETH and FC-24ETH.
The Kramer VSPM software lets you emulate virtual ports which normally would
be present in the machine hardware. After setup, the virtual port lets you control
Kramer machines via your PC.
5.3 Configuring an Ethernet Connection on the PC
If the control application can directly connect to the Ethernet driver, select the host
IP and port number according to your FC-21ETH, FC-22ETH and FC-24ETH
configuration, as illustrated in Figure 8 .
Figure 8: Configuring a Remote Connection