Kramer Electronics PL-18 - Manual (Page 17)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the P3K Wizard
14
10.1.3 Updating the Firmware
To update the firmware, perform the following steps:
1. Open the Kramer P3K Wizard
1
by double-clicking the desktop icon P3K
Wizard.
The P3K Wizard screen appears
2
:
Figure 3: P3K Wizard Screen
2. Click the Connect button.
The Connect Window appears.
Note: The PL-18 does not have an Ethernet interface. Do not select any of
the Ethernet options on the Connect window.
1 You can download and install the latest version of the P3K Wizard from www.kramerelectronics.com .
2 The screens appearing in this manual are examples of the process. The actual screens may differ in their content.