Kramer Electronics PL-18 - Manual (Page 23)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the P3K Wizard
20
10.2 Changing the Device Parameters
To change the device parameters, (for example, the K-NET ID) do the
following:
1. Connect a PC to the PL-18 (see section 10.1.2 ).
2. Open the Kramer P3K Wizard
1
by double-clicking the desktop icon P3K
Wizard.
The P3K Wizard screen appears (see
Figure 3 ).
3. Click the Connect button to open the Connect window (see Figure 4 ).
4. Choose the SERIAL/USB connection, and click OK.
The Connect window disappears and the Device Properties become visible.
5. Change the parameters as required and click SET.
1 You can download and install the latest version of the P3K Wizard from www.kramerelectronics.com