Kramer Electronics RC-3TBU - Manual (Page 24)

SL-14RC/N - Front Panel Button Caps and Labels 21
10.1 Installing the Front Panel Button Caps and Labels
To install the button caps and labels:
1. Remove the required labels from the supplied button label sheet.
2. Remove the supplied button caps from the bag and insert the labels into the
button caps.
3. Taking care that the button is oriented correctly, gently press the button cap
on to the required button of the SL-14RC/N.
4. Repeat for all the button caps.
10.2 Replacing the Front Panel Button Labels
Note: The button caps are a press fit on the buttons and must be removed
carefully or the buttons may be damaged. Remove the button caps only with the
supplied button cap suction removal tool.
To replace the front panel button labels:
1. Using the supplied button cap suction removal tool, gently pull the button
cap away from the button. Do not use excessive force.
2. Remove the required labels from the supplied button label sheet.
3. Remove the old label from inside the button and insert the new label into the
button cap.
4. Taking care that the button is oriented correctly, gently press the button cap
on to the button of the SL-14RC/N.