Kramer Electronics Tavor 5-O - Manual (Page 12)

8 SPK-WA511 - Installing the Speakers
2. Connect the audio source (for example, a CD or a DVD player and so on) to
one of the INPUT connectors on the active speaker.
3. Connect the power.
4. Adjust the volume on the input source.
5. Adjust the volume control on the rear side control panel.
6. Adjust the bass and treble control on the rear side control panel.
7. If required, connect an additional set of speakers by connecting the LOOP
OUTPUT connector to the input of a second active speaker.
8. If required, mount the speaker on the wall via the removable mounting
brackets. To do so:
 Mark the location of the mounting holes
 Screw the mounting screws (not included in the package) into the
mounting holes
 Slide the mounting bracket over the mounting screws so that the
mounting bracket is secured to the surface