Kramer Electronics SP-14 User Manual
Page 2
This manual details the protocol used to remotely control your television broadcast image
processor. Where pseudo code can clarify the protocol, it has been included.
If you have any queries relating to this or any other product supplied by Kramer visit our Web
.
For technical support e-mail
COPYRIGHT
This document and the software described within it are copyrighted with all rights reserved. Under
copyright laws, neither the documentation nor the software may be copied, photocopied, reproduced,
translated, or reduced to electronic medium or machine readable form, in whole or in part, without
prior written consent of Kramer Electronics Ltd ("Kramer"). Failure to comply with this condition may
result in prosecution.
Kramer does not warrant that this product will function properly in every hardware/software
environment. .
Although Kramer has tested the hardware, firmware, software and reviewed the documentation,
KRAMER MAKES NO WARRANTY OR REPRESENTATION, EITHER EXPRESS OR IMPLIED,
WITH RESPECT TO THIS SOFTWARE OR DOCUMENTATION, THEIR QUALITY,
PERFORMANCE, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. THIS
SOFTWARE AND DOCUMENTATION ARE LICENSED 'AS IS', AND YOU, THE LICENSEE, BY
MAKING USE THEREOF, ARE ASSUMING THE ENTIRE RISK AS TO THEIR QUALITY AND
PERFORMANCE.
IN NO EVENT WILL KRAMER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
SOFTWARE OR DOCUMENTATION, even if advised of the possibility of such damages. In
particular, and without prejudice to the generality of the foregoing, Kramer has no liability for any
programs or data stored or used with Kramer software, including costs of recovering such programs
or data.
Copyright
(c) 2013
All World-wide Rights Reserved
All trade marks acknowledged
Kramer operates a policy of continued product improvement, therefore specifications are subject to
change without notice as products are updated or revised.
E&OE.