Kramer Electronics TP-142 - Manual (Page 11)

8 TP-141, TP-142 - Overview
# Feature Function
1 LINK LED Illuminates when receiving the correct input signal
2 LEVEL Trimmer Adjusts the output signal level
3 EQ. Trimmer Adjusts the cable compensation equalization level
Degradation and VGA/XGA signal loss can result from
using long cables (due to stray capacitance),
sometimes leading to a total loss of sharpness in
high-resolution signals.
Use a screwdriver to carefully rotate the trimmer,
adjusting the appropriate level.
4 ON LED Illuminates when receiving power
5 XGA OUT 15-pin HD Connector Connects to the XGA acceptor
6 LINE IN RJ-45 Connector Connects to the TP-141
7 AUDIO OUT ANALOG 3.5mm Mini
Jack Connects to the analog audio acceptor
8 AUDIO OUT S/PDIF RCA
Connector Connects to the digital audio acceptor
9 12V DC +12V DC connector for powering the unit
10 VS Switch To set V SYNC to positive polarity, slide the switch
to the right; to set the V SYNC to negative polarity,
slide the switch to the left
By default, both switches are set to the left (for a
negative V SYNC and H SYNC polarity)
11 HS Switch To set H SYNC to positive polarity, slide the switch
to the right; to set the H SYNC to negative polarity,
slide the switch to the left
12 XGA/VIDEO Switch To set for any video signal, such as HDTV, slide the
switch to VIDEO; to set for a computer graphics
signal, slide the switch to XGA