Kramer Electronics TP-142 - Manual (Page 7)

4 TP-141, TP-142 - Overview
3 Overview
The TP-141 and TP-142 are a high-immunity, extended-range twisted pair
transmitter and receiver for computer graphics video and unbalanced stereo audio
signals.
The TP-141 converts computer graphics video and audio inputs to twisted pair
signals, and the TP-142 converts the twisted pair signals back into computer
graphics video, unbalanced stereo and S/PDIF digital audio signals. Together the
TP-141 and TP-142 form a computer graphics video/audio line transmitter/receiver
system.
More specifically, the products feature:

Highest immunity from any kind of interference

Resolution up to UXGA

HDTV compatibility

Simultaneous unbalanced stereo and S/PDIF (24-bit 48kHz) audio outputs
(TP-142)

Level (gain) and EQ (peaking) controls (TP-142)

System range up to 250m (750ft)
 Power Connect™ System - Only one unit in a system, the transmitter or the
receiver, needs to be connected to a power source when the devices are
within 50m (150ft) of each other
Note: The TP-141 and TP-142 are not compatible with existing Kramer TP units
such as the TP-121, TP-122, and so on.
3.1
About the Power Connect™ Feature
The Power Connect feature applies as long as the cable can carry power. This
feature is available when using STP cable and the distance does not exceed 50m
(164ft) on standard CAT 5 cable. For longer distances, heavier gauge cable
should be used (TP cable is still suitable for the video/audio transmission, but not
for feeding the power at these distances). For units which are connected via RJ-45