Kramer Electronics TP-45EDID - Manual (Page 14)

TP-45EDID - Connecting a Component/XGA – Audio Distribution System 11
7. On the TP-46N underside:
 Using a screwdriver to carefully rotate the trimmer, adjust the video
output signal level and/or cable compensation equalization level, if
required
Figure 2: Component/XGA – Audio Distribution System, XGA Mode
5.2 Connecting the System in Component Video Mode
To configure a TP-45EDID/TP-46N Component/XGA – Audio distribution system
in the component video mode, as the example in Figure 3 illustrates, do the
following:
1. On the TP-45EDID, connect the following:

A component video source (for example, a DVD player) to the Y,
Cb/Pb, Cr/Pr RCA connectors
 A digital audio source to the S/PDIF RCA connector using up to 300ft
(100m) of UTP cabling