AT&T DECT EL52100 - Manual (Page 11)

0
Making, answering and ending a call
Making a call
Press PHONE/ FLASH or SPEAKER and then dial a telephone
number, or predial by first dialing the number and then pressing
PHONE/ FLASH or SPEAKER. When entering the number
before pressing PHONE/ FLASH or SPEAKER, you can:
Press and hold REDIAL /PAUSE to insert a three-second dialing
pause (a P appears).
Press DELETE to make corrections.
Press and hold OFF/ CLEAR to return to idle mode.
The screen shows the elapsed time as you talk (in hours, minutes
and seconds).
Answering a call
Press PHONE/ FLASH , SPEAKER, or any dial pad key (known as Any Key Answer).
Ending a call
Press OFF/ CLEAR or put the handset in the telephone base to
end the call (known as Auto Off).
Speakerphone
During a call, press SPEAKER to switch between speakerphone and normal handset use.
Press OFF/ CLEAR to hang up.
Temporary ringer silencing
While the telephone is ringing, press OFF/ CLEAR or MUTE to silence the ringer
temporarily on that handset only. This turns off the ringer without disconnecting the
call. The next incoming call rings normally at the preset volume.
•
•
•