AT&T DECT EL52100 - Manual (Page 12)


Options while on a call
Volume control
While on a call, press DIR /VOLUME to increase or press
CID /VOLUME to decrease the listening volume.
NOTE: The handset earpiece volume setting (-5) and speakerphone
volume setting (-6) are independent. Changing one does not affect the other.
Chain dialing
While on a call, you can initiate a dialing sequence from numbers stored in the directory,
caller ID history or redial list. Doing this can be useful if you wish to access other
numbers (such as bank account numbers or access codes) from the directory, caller ID
history or redial list.
To dial a number from the directory, caller ID history or redial list while on a call, access
the number through the menu system:
While on a call, to show the directory or caller ID history, press MENU/ SELECT , scroll
to >DIRECTORY or >CALL LOG. Press MENU /SELECT.
-OR-
While on a call, press
REDIAL/ PAUSE to show the redial list.
Scroll to the desired number or press the dial pad keys to find the desired directory
entry (see
To search by name in the online user’s manual for more options).
Press MENU /SELECT. The selected number is dialed.
Redial
The handset stores the 20 numbers most recently called in the redial list.
To review and call numbers in the redial list, press REDIAL/ PAUSE in idle mode. The
most recently called number appears on the screen.
If it is not the desired number, press
DIR or CID to scroll through the numbers in
the list.
Once the desired number appears, press
PHONE/ FLASH or SPEAKER to dial
the number, or press OFF/ CLEAR to exit the redial list.
.
2.
3.
.
2.
3.