RADWAG WPW/T 60/HR3/FH Waterproof Control Scales - Manual (Page 111)

• Use a keyboard to enter a maximum value for the process and confirm
it by pressing .
Return to weighing:
See 11.3.
24.8.6.4. Averaging from subsequent dosing cycles
In parameter <P7.4.6.4 AVERAGING VALUE> users can set a number of
subsequent dosing cycles to consider for calculating the correctional value.
Averaging is always calculated form subsequent dosing cycles.
Procedure:
• Enter
<P7 WORK MODES> and then:
• Enter the required number of dosing cycles using the scale keyboard
(acceptable settings are 1 to 10) and confirm it by pressing .
Return to weighing:
See 11.3.
- 111 -