RADWAG WPW/T 60/HR3/FH Waterproof Control Scales - Manual (Page 80)

Procedure:
• To declare an output number connected with the function,
enter <P8.2 OUTPUT CONF.> and then:
• Press
, you will see <P8.2.1 MIN>,
• Press
:
• Confirm the selected value with
,
• Using go to the next function.
Notice:
You can ascribe all functions to outputs accordingly. Remember
that the standard solution has only 3 reed relay outputs.
Return to weighing:
See 11.3.
21. STATISTICS
21.1. Updating statistics
All statistics are updated in real time after every subsequent measurement
after putting a load on the pan, reaching equilibrium, and pressing .
Number of weighings and sum are show in the lower line of the display.
Statistics can be calculated globally (does not depend on the selected
product) or separately for every product from the assortment database.
It can be set in parameters <P6.6 STATISTICS>.
- 80 -