RADWAG WPW 60/H5/K Multifunctional Scales - Manual (Page 110)

24.8. Dosing
Standard indicators are equipped with signalling fields and internal circuit
of - 3 optoinsulated inputs (5
÷24V DC), 3 optoinsulated reed relay outputs.
Caution:
1. Working mode „Dosing” does not support continuous printouts;
2. Inductive loads connected to the dosing indicator should have
protections against the coil induction phenomenon. Example
connetion diagrams of dosing indicators outputs with direct and
alternative current protections are in point 32.6 of the manual.
24.8.1. Dosing mode setting
Users can chose one of three different modes <P7.4.1 DOSING NAM.>.
Procedure:
• Enter
<P7 WORK MODES> and then:
DOSE. MODE 1 - manual operation (after pressing ),
DOSE. MODE 2 - automatic operation,
DOSE. MODE 3 - „-” negative dosing (after tarring
and pressing ).
Return to weighing:
See 11.3.
- 110 -