Led power setting, Work modes for leds – RADWAG WPW 60/H5/K Multifunctional Scales User Manual
Page 89
Advertising
22.2. LED power setting
According to the requirements (e.g. intensity of external light) it is
possible to change the light flux from LEDs in the scale of 0% to 100%.
Procedure:
• Enter
<P9.2 DIODES> according to 11.2. and then:
Return to weighing:
See 11.3.
22.3. Work modes for LEDs
In <P9.2 DIODES> users can chose a work mode for LEDs.
Procedure:
• Enter
<P9.2 DIODES> according to 11.2. and then:
- 89 -
Advertising
This manual is related to the following products:
- WPW 60/H4/K Multifunctional Scales WPW 60/H3/K Multifunctional Scales WPW 60/C2/K Multifunctional Scales WPW 6/H2/K Multifunctional Scales WPW 6/F1/K Multifunctional Scales WPW 300/H6/K Multifunctional Scales WPW 300/H5/K Multifunctional Scales WPW 300/C3/K Multifunctional Scales WPW 300/C2/K Multifunctional Scales WPW 30/H3/K Multifunctional Scales WPW 30/F1/K Multifunctional Scales WPW 30/C2/K Multifunctional Scales WPW 3/H1/K Multifunctional Scales WPW 150/H6/K Multifunctional Scales WPW 150/H5/K Multifunctional Scales WPW 150/H4/K Multifunctional Scales WPW 150/H3/K Multifunctional Scales WPW 150/C3/K Multifunctional Scales WPW 150/C2/K Multifunctional Scales WPW 15/H3/K Multifunctional Scales WPW 15/H2/K Multifunctional Scales WPW 15/F1/K Multifunctional Scales