Cirrus Logic CS2200-OTP - Manual (Page 19)

CS2200-OTP
DS842F2 19
6.3.3 Enable PLL Clock Output on Unlock (ClkOutUnl)
Defines the state of the PLL output during the PLL unlock condition.
6.3.4 M2 Pin Configuration (M2Config[2:0])
Controls which special function is mapped to the M2 pin .
ClkOutUnl Clock Output Enable Status
0 Clock outputs are driven ‘low’ when PLL is unlocked.
1 Clock outputs are always enabled (results in unpredictable output when PLL is unlocked).
Application: “PLL Clock Output” on page 13
M2Config[2:0] M2 pin function
000 Disable CLK_OUT pin.
001 Disable AUX_OUT pin.
010 Disable CLK_OUT and AUX_OUT.
011 RModSel[1:0] Modal Parameter Enable.
100 Reserved.
101 Reserved.
110 Reserved.
111 Force AuxOutSrc[1:0] = 10 (PLL Clock Out).
Application: “M2 Mode Pin Functionality” on page 15