Cirrus Logic CS42416 - Manual (Page 47)

DS602F2 47
CS42416
6.6.4 INTERPOLATION FILTER SELECT (FILT_SEL)
Default = 0
Function:
This feature allows the user to select whether the DAC interpolation filter has a fast- or slow roll-off.
For filter characteristics, please See
“D/A Digital Filter Characteristics” on page 10 .
0 - Fast roll-off.
1 - Slow roll-off.
6.6.5 HIGH-PASS FILTER FREEZE (HPF_FREEZE)
Default = 0
Function:
When this bit is set, the internal high-pass filter for the selected channel will be disabled. The current
DC offset value will be frozen and continue to be subtracted from the conversion result. See
“A/D Dig-
ital Filter Characteristics” on page 8 .
6.6.6 DAC SERIAL PORT MASTER/SLAVE SELECT (DAC_SP M/S)
Default = 0
Function:
In Master Mode, DAC_SCLK and DAC_LRCK are outputs. Internal dividers will divide the master
clock to generate the serial clock and left/right clock. In Slave Mode, DAC_SCLK and DAC_LRCK
become inputs.
If the DAC_SP is in Slave Mode, DAC_LRCK must be present for proper device operation.
6.6.7 ADC SERIAL PORT MASTER/SLAVE SELECT (ADC_SP M/S)
Default = 0
Function:
In Master Mode, ADC_SCLK and ADC_LRCK are outputs. Internal dividers will divide the master
clock to generate the serial clock and left/right clock. In Slave Mode, ADC_SCLK and ADC_LRCK
become inputs.
If the ADC_SP is in Slave Mode, ADC_LRCK must be present for proper device operation.
To use the PLL to lock to ADC_LRCK, the ADC_SP must be in Slave Mode. When using the PLL to
lock to LRCK, if ADC_SDOUT is configured to be clocked by the ADC_SP, both ADC_SCLK and AD-
C_LRCK must be present. If ADC_SDOUT is configured to be clocked by the DAC_SP, only the AD-
C_LRCK signal must be applied.