Cirrus Logic CDB5364 - Manual (Page 6)

6 DS625DB1
CDB5364
3.3 FlexGUI Hi-Level View
The Cirrus Logic FlexGUI defaults to the Hi-Level View as shown in Figure 1 . This view provides functionally
grouped control over the CS5364, reducing the need to memorize the exact location of bit settings. Any reg-
ister may be modified at any time; however, the effect of changes made to the CS5364 is gated off until the
Control Port Bit is enabled.
When switching to TDM mode, the CS8406 Clock and Date source (Board Control Panel) must be changed
prior to changing the CS5364 SAI format. This sequential ordering resets the FPGA to assure that it timed
properly with the CS5364 TDM packet stream.
Figure 1. Hi-Level FlexGUI View