Cirrus Logic CDB5463U - Manual (Page 19)

CDB5463U
DS805DB2 19
2.8 Data Collection Window
The Data Collection Window (Figure 12) allows the user to collect sample sets of data from the CS5463
and analyze them using time domain, FFT, and histogram plots. The Data collection Window can be ac-
cessed by pulling down the Menu menu, and selecting the Data Collection Window item, or by pressing
<F6>.
Figure 12. Data Collection Window
2.8.1 Time Domain / FFT/ Histogram Selector
This menu selects the type of data processing to perform on the collected data and display in the plot area.
Refer to the Analyzing Data section for more information.
2.8.2 Config Button
This button will bring up the Configuration window, in which the user can modify the data collection spec-
ifications. Refer to the Configuration Window section in this document for more information.
2.8.3 Collect Button
This button will collect data from the part, to be analyzed in the plot area. See the Collecting Data Sets
section for more information.
2.8.4 Output Button
This button will bring up a window in which the user can output the data to a file for later use, print out a
plot, or print out the entire screen. When saving data, only the data channel being displayed on the plot
will be saved to a file.