Duff-Norton EM1050-200 (TAP) - Manual (Page 5)

5
Connect AC neutral to ‘Common’ and switched motor
power to ‘Extend’ and ‘Retract’. Capacitor may be
connected without regard to polarity.
Connecting cable may be run through the grommet
supplied, or a 1/2" size conduit fitting may be
connected to the cover. If using fitting, check for
clearance between fitting and installed cover.
Figure 2-1. Wiring Schematic Figure 2-2.
Terminal Block Connections (AC)
Limit Switches
Motor
Figure 2-3. Wiring Schematic
DC with Clutch
DC Power
DPDT-C.O.
DC models with clutch may be operated through relays
or by utilizing a momentary action, Double Pole,
Double Throw, Center-off toggle switch (Duff-Norton
part EM534). If actuator runs opposite the desired
direction, reverse the red and black motor wires.
Common
Extend
Retract
Capacitor
Capacitor