Apple Color LaserWriter 12/600 PS - Manual (Page 130)

10 Complete the dialog box as follows:
m Fill in the Available Memory box with the number of kilobytes your hard
disk can store.
m If you have Font Metrics files for the fonts, you can check the Read Font
Metrics File checkbox.
m Make sure the Volatile checkbox is not checked.
m Make sure the Writable checkbox is checked.
11 Click Add.
A dialog box opens.
12 Type a name for the hard disk.
13 Click a button to indicate which SCSI number the hard disk has.
The internal hard disk uses SCSI ID number 0, and the printer’s CPU uses 7.
14 Click OK.
You return to the Device Installer dialog box.
15 Click Close.
If the hard disk installed is already initialized in Apple HFS format, you can
now download fonts. If not, go on to initialize the hard disk.
Initializing the hard disk
If you attach a hard disk to the printer to store fonts, you must initialize it (if
it is not already in Apple HFS format) before you can use it. You can do so by
following the steps below.
1 From the Program Manager, open the Control Panel.
2 Double-click the Printers icon to display the Printers dialog box.
3 If it’s not already selected, select the Color LaserWriter 12/660 PS from the Installed
Printers list.
WARNING Initializing the hard disk erases all the data on it. Initialize the
hard disk only if you’re sure it’s new or if it’s OK to erase it.
116 Chapter 6