MSI H61MA-E35 (B3) - Manual (Page 26)

2-12
Hardware Setup MS-7740
Chapter 2
Connectors
Serial ATA Connector: SATA1~4, SATA5~6 (optional)
This connector is a high-speed Serial ATA interface port. Each connector can connect
to one Serial ATA device.
* The MB layout in this figure is for reference only.
SATA1~4 (3Gb/s)
supported by Intel ® H61 (B3)
SATA5~6 (6Gb/s) (optional)
supported by ASMedia ® ASM1061 SATA3
SATA5
SATA6
SATA4
SATA2
SATA1
Important
Please do not fold the Serial ATA cable into a 90-degree angle. Otherwise, data loss
may occur during transmission.
Chassis Intrusion Connector: JCI1
This connector connects to the chassis intrusion switch cable. If the chassis is opened,
the chassis intrusion mechanism will be activated. The system will record this status
and show a warning message on the screen. To clear the warning, you must enter the
BIOS utility and clear the record.
1.CIN
TRU
2.Gro
und