MSI G41M4-F - Manual (Page 12)

2
ReaR PaneL
the rear panel provides the following connectors:
the pin-pad side of LGa 775 CPu.
the surface of LGa 775 CPu.
Remember to apply some thermal
paste on it for better heat dispersion.
note: to reach the 8-channel sound effect, the 7th and 8th channels must be out-
put from front panel if you purchase the mainboard with  audio jacks
HaRdWaRe SetuP
this chapter tells you how to install the CPu, memory modules, and expansion
cards, as well as how to setup the jumpers on the mainboard. it also provides the
instructions on connecting the peripheral devices, such as the mouse, keyboard,
etc. While doing the installation, be careful in holding the components and follow
the installation procedures.
CPu & Cooler installation Procedures for LGa775
When you are installing the CPu, make sure to install the cooler to prevent over-
heating. if you do not have the CPu cooler, consult your dealer before turning on
the computer.
PS/2 mouse
PS/2 keyboard
Parallel port
Serial port VGa port uSB ports
Lan
Line-in
Line-out
MiC
RS-out
CS-out
SS-out
alignment key alignment key
yellow triangle is the Pin 
indicator
yellow triangle is the Pin 
indicator
(optional)