MSI G41M4-F - Manual (Page 23)

2
MS-7592
Cell Menu
Current CPu/dRaM Frequency
it shows the current frequency of CPu/Memory. Read-only.
intel eiSt
the enhanced intel SpeedStep technology allows you to set the performance
level of the microprocessor whether the computer is running on battery or aC
power. this field will appear after you installed the CPu which support speedstep
technology.
adjust CPu FSB Frequency (MHz)
this item allows you to adjust the CPu FSB frequency.
adjusted CPu Frequency (MHz)
it shows the adjusted CPu frequency (FSB x Ratio). Read-only.
advance dRaM Configuration
Press <enter> to enter the sub-menu.
dRaM timing Mode
Selects whether dRaM timing is controlled by the SPd (Serial Presence de-
tect) eePRoM on the dRaM module. Setting to [auto By SPd] enables dRaM
timings and the following related items to be determined by BioS based on the
configurations on the SPd. Selecting [Manual] allows users to configure the
dRaM timings and the following related items manually.
CaS Latency (CL)
When the dRaM timing Mode sets to [Manual], the field is adjustable. this
controls the CaS latency, which determines the timing delay (in clock cycles)
before SdRaM starts a read command after receiving it.
tRCd
When the dRaM timing Mode sets to [Manual], the field is adjustable. When
dRaM is refreshed, both rows and columns are addressed separately. this
setup item allows you to determine the timing of the transition from RaS (row