MSI 760GM-P33 - Manual (Page 20)

20
aPS lED Status indicator: lED1 (Optional)
these aPS (active Phase Switching) lED indicates the current CPU power phase
mode. Follow the instructions below to read.
lED1
On the lED will light when CPU is in 3 phase power mode.
OFF the lED will go off when CPU is in 1 phase power mode.
Overclock FSB Switch: OC_SW1 (Optional)
You can overclock the FSB to increase the processor frequency by changing the
switch. Follow the instructions below to set the FSB.
Default increase 10%
speed of FSB
increase 15%
speed of FSB
increase 20%
speed of FSB
iMPOrtant
Make sure that you power off the system before setting the switch.
When overclocking cause system instability or crash during boot, please set the
switch to default setting.
*
*