MSI 760GM-P33 - Manual (Page 3)

3
MS-7623
SaFety inStRuCtionS
always read the safety instructions carefully.
Keep this user Manual for future reference.
Keep this equipment away from humidity.
Lay this equipment on a reliable flat surface before setting it up.
the openings on the enclosure are for air convection hence protects the
equipment from overheating. do not cover the openings.
Make sure the voltage of the power source and adjust properly 0/220V
before connecting the equipment to the power inlet.
Place the power cord such a way that people can not step on it. do not place
anything over the power cord.
always unplug the Power Cord before inserting any add-on card or module.
all cautions and warnings on the equipment should be noted.
never pour any liquid into the opening that could damage or cause electri-
cal shock.
if any of the following situations arises, get the equipment checked by a ser-
vice personnel:
the power cord or plug is damaged.
Liquid has penetrated into the equipment.
the equipment has been exposed to moisture.
the equipment does not work well or you can not get it work according
to user Manual.
the equipment has dropped and damaged.
the equipment has obvious sign of breakage.
do not leave this equipment in an environment unconditioned, storage tem-
perature above 60°C (40°F), it may damage the equipment.
Caution
danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type recommended by the manufacturer.
警告使用者
這是甲類的資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在這種
情況下，使用者會被要求採取某些適當的對策。
廢電池請回收
For better environmental protection, waste batteries should be col-
lected separately for recycling or special disposal.
■
■
■
■
■
■
■
■
■
■
■
○
○
○
○
○
○
■
CoPyRiGHt notiCe
the material in this document is the intellectual property of MiCRo-StaR in-
teRnationaL. We take every care in the preparation of this document, but no
guarantee is given as to the correctness of its contents. our products are under
continual improvement and we reserve the right to make changes without notice.
tRadeMaRKS
all trademarks are the properties of their respective owners.
MSi ® is registered trademark of Micro-Star int’l Co.,Ltd.
nVidia ® is registered trademark of nVidia Corporation.
ati ® is registered trademark of ati technologies, inc.
aMd ® is registered trademarks of aMd Corporation.
intel ® is registered trademarks of intel Corporation.
Windows ® is registered trademarks of Microsoft Corporation.
aMi ® is registered trademark of american Megatrends inc.
award ® is a registered trademark of Phoenix technologies Ltd.
Sound Blaster ® is registered trademark of Creative technology Ltd.
Realtek ® is registered trademark of Realtek Semiconductor Corporation.
JMicron ® is registered trademark of JMicron technology Corporation.
netware ® is a registered trademark of novell, inc.
ReViSion HiStoRy
Revision Revision History date
V.0 First Release november 2009
■
■
■
■
■
■
■
■
■
■
■
■