Nostalgia Electrics PKC200 - Manual (Page 8)

E
N
G
LI
S
H
6
ASSEMBLY
Before first use, follow these steps to attach the Upper Popping Chamber and Handle to the
Lower Popping Chamber.
• Position the Upper Popping Chamber so that it will open on the opposite side
of the unit as the cord. Insert the tab of the Upper Popping Chamber into the
circular knob of the Lower Popping Chamber and press down firmly.
• On the opposite side, align handle with knob on Lower Popping Chamber and attach using
the included Screw and a Phillips head screwdriver (screwdriver not included).
• Slide the assembled Popping Chamber into the Base with the circular knobs resting securely
inside the notches.
SWITCH POSITIONS
Left: " | " Heat and Stir / Center: " O " OFF / Right: " || " Stir
Upper Popping
Chamber
Handle
Lower Popping
Chamber
Screw