Seiwa Tigershark Plus - Manual (Page 42)

44 User Manual
NOTE If the Video Input signals is not detected (E.g. the video Camera is not
connected to the Video Input connector), the VIDEO INPUT menu item must
be grayed out.
BARRAMUNDI/BARRAMUNDI P
LUS
:
[MENU] + [MENU] + "DISPLAY" + [ENTER] + "VIDEO INPUT" + [ENTER]
Select Video Input : Selects the Video Input, among None, Video 1, Video 2 or Auto Switch. If Auto Switch is
selected, choose the switching time.
Activate Video Input : Activates the Video Mode from menu. At the activation of the Video Mode the following
messages are shown on a dedicated window: "Connected Video Input Signal is XXXX. The
Video Mode will be activated". XXXX can be PAL or NTSC: the software automatically detects
the type of Video Input source connected. Once the Video Mode is active use the following keys
to adjust video settings: press and immediately release [POWER], use the [C
ONTR
+]/[C
ONTR
-]
and [B RIGHT +]/[B RIGHT -] soft keys to adjust contrast and backlight; move the cursor up/down to
adjust brightness and left/right to adjust colors, press [ZOOM IN]/[ZOOM OUT] to adjust hue
phase. Pressing any other key exits from Video Mode.
Switching Timeout : Selects the timeout for the Auto Switch option among 5, 10, 30 seconds, 1, 5, 10 minutes.
Restore Defaults : Restores default values of Contrast, Brightness, Backlight, color saturation and Hue phase. If
Video 1 or Video 2 is selected, their relative settings are set to the default values and the
message "OK" is shown to the selected item. If the option All is selected, both the settings for
Video 1 and Video 2 are restored to the default values and the message "OK" is shown next
to Video 1, Video 2 and All.
STARFISH/STARFISH E:
Allows the "picture-in-picture" functionality, so the Video Input image can be
shown on a window and placed over the chart display or other data pages.
[MENU] + [MENU] + "DISPLAY" + [ENTER] + "VIDEO INPUT" + [ENTER]
Full Screen Video : Shows the image from the video camera at full screen.
Chart + Video : Shows the chart display with the image from the video camera on a rectangular window placed
on the upper-left corner of the screen.
MARLIN:
Allows the "picture-in-picture" functionality, so a Video Input image can be shown
on a window and placed over the other Video Input image at full screen.
[DATA] + "VIDEO INPUT" + [ENTER]
Full Screen Video 1 : Shows the image from the video camera 1 at full screen.
Full Screen Video 2 : Shows the image from the video camera 2 at full screen.
Full Screen Video 1 + Video 2 : Shows the image from the video camera 1 at full screen with the image from the video
camera 2 on a rectangular window placed on the upper-left corner of the screen.
Full Screen Video 2 + Video 1 : Shows the image from the video camera 2 at full screen with the image from the video
camera 1 on a rectangular window placed on the upper-left corner of the screen.
3.6 NAV DISPLAY MENU
Allows selecting CDI Scale and Navigation Page fields. It is possible to display this
menu only if the Navigation Data page or the 3D Road page has been selected.
[MENU] + "NAV DISPLAY" + [ENTER]
CDI scale : Selects the CDI (Course Deviation Indicator) Scale among 0.2, 0.5, 1.0, 2.0, 4.0, 10.0 Nm.
Navigation Page : A new window appears with six items. Select the item you want to change and press [ENTER]:
another window appears, select the fields to display in the Navigation Data page or in 3D Road page
among BRG (Bearing), COG (Course Over Ground), DST (Distance to Destination), SOG (Speed
Over Ground), STR (Steering), VMG (Velocity Made Good), XTE (Cross Track Error), DRF (Drift),
SET (Direction of the Current), DPT (Depth), TEMP (Water Temperature), TTG (Time To Go).
3.7 ADVANCED MENU
[MENU] + [MENU] + "ADVANCED" + [ENTER]
The Advanced options are arranged in sub-menus.