Seiwa Tigershark Plus - Manual (Page 45)

47 User Manual
[MENU] + [MENU] + "ADVANCED" + [ENTER] + "Input/Output"+ [ENTER]
+ "Cable Wiring" + [ENTER] + "GPS Cable Wiring" + [ENTER]
BARRAMUNDI/BARRAMUNDI P
LUS
/EXPLORER 3 /MARLIN:
AUX In I/O Cable Wiring page
Shows a window containing the AUX IN I/O cable wiring.
[MENU] + [MENU] + "ADVANCED" + [ENTER] + "Input/Output"+ [ENTER]
+ "Cable Wiring" + [ENTER] + "AUX In I/O Cable Wiring" + [ENTER]
Send/Receive Routes & Marks
Sets the desired port used for transferring User Points and Routes functions:
[MENU] + [MENU] + "ADVANCED" + [ENTER] + "Input/Output" + [ENTER]
+ "SEND ROUTES & MARKS" + [ENTER] + "Port 1/2/3" + [ENTER]
BARRAMUNDI/BARRAMUNDI P
LUS
/EXPLORER 3 /MARLIN:
[MENU] + [MENU] + "ADVANCED" + [ENTER] + "Input/Output" + [ENTER]
+ "SEND ROUTES & MARKS" + [ENTER] + "Port 1/2/3/4/5" + [ENTER]
3.7.2 C-Link menu
Select the Primary or Secondary Station (see the dedicated Chapter):
[MENU] + [MENU] + "ADVANCED" + [ENTER] + "C-LINK" +
[ENTER] + "Secondary Station/Primary Station" + [ENTER]
3.7.3 Fix & Compass menu
To handle the functions related to navigation and to set the reference heading
information such as bearing angles (True or Magnetic), the Magnetic Variation
source and to enter Compass Calibration values.
[MENU] + [MENU] + "ADVANCED" + [ENTER] + "FIX & COMPASS" + [ENTER]
Fix Correction : Turns On/Off the Correction from the positioning system. If the new Correction is calculated,
but the Correction is not enabled, the ship's position is not changed.
Compute Correction : Corrects fixes from the positioning instrument. By placing the cursor on the ship's real position
and selecting this option, the error is calculated and internally memorized for appropriate
correction, but not applied.
Correction Offset : Manual correction of fix position.
Static Navigation : Sets up a threshold for the speed. When the speed received from the positioning device is
under that threshold, the chart plotter displays zero speed.
Position Filter : Selects Low/Medium/High/Off the Position Filter. In case of a jittering fix this option makes the
ship's position more stable and the track smoother.
Speed Filter : Selects Low/Medium/High/Off the Speed Filter. When it is On, you can filter the speed of the ship,
to optimize it.
Bearing : Selects either degrees magnetic, Auto Mag, or True. If magnetic readings are selected the
variation is computed automatically for every zone as soon as the chart is displayed.
Magnetic Variation : It is possible to calculate the Magnetic Variation in an Automatic or manual mode, by inserting
the step for calculation of Magnetic Variation.
Calibrate Compass : The variation table is used to match magnetic value readout on the chart plotter comparable
with the value given by the compass of the boat. In other words, since the compass of the boat
must be compensated (due to the iron masses, ...), we use the same values given by the chart
plotter. This means that, for example, if the BRG to the next Waypoint readout in the chart
plotter display is "X" Mag degree, if you steer the boat reading "X" Mag degree from the
compass, you are driving well toward the next Waypoint.
3.7.4 C-Staff menu
The C-Staff functions are based on STAFF Concept ® (Satellite Tracking Aided Fleet
Fishing). The STAFF Concept ® is designed for professional fishing purpose to al-
low monitoring the position of the vessels of a fleet from each vessel (the fleet
may have up to 20 vessels max).
[MENU] + [MENU] + "ADVANCED" + [ENTER] + "C-STAFF" + [ENTER]
For more information see the specific User Manual.