Argox OS-214 plus - Manual (Page 12)

18
10. Put the print head module down and press down firmly
until you hear a snap.
11. Close the top cover and turn on the printer or press the
"FEED" button if the printer is already on.
Print Head Module
Feed Button
19
Peel Off Mode
Note: For Peel-off mode you must first install the dispenser kit.
Please refer to Appendix I.
Follow Steps 1 to 8
listed in Standard Mode above.
9. Remove enough labels to expose approximately a 6"
length of backing paper.
Backing Paper
Peeler Sensor