Vollrath U3-02 - Manual (Page 10)

4
B. Mix Pump Hose Installation.
Follow the steps below to install the mix pump hose.
1. Turn pump on.
2. Feed one end of mix pump hose into the entering or
pick-up hose side (left) of black cover.
3. Gently push the hose into the black cover until it begins
to feed. See Figure A.
Figure A
4. Allow the hose to feed itself thru the pump until 6"
remains on the entering side.
5. Turn pump off.
6. Connect mix pump hose to pickup hose adapter using
small hose clamp. See Figure B.
CAUTION
Risk of Product Damage
Avoid twisting mix pump hose while feeding into cover.
Twisting the hose may cause the hose to rupture.
Figure B
Figure C
7. Turn pump on.
8. Gently pull on the discharge hose to help remaining 6"
of mix pump hose to feed thru pump until hose adapter
prevents further feeding.
9. Turn pump off. See Figure C.