AT&T 5830 User Manual
AT&T Handset Cordless Phone
Advertising
Table of contents
Document Outline
- 5840 manual
- CONTENTS
- BEFORE YOU BEGIN
- INSTALLATION
- Table/Desk Installation
- Wall Installation
- 1. Connect the power cord and telephone line cord to the underside of the corded base
- 2. Position the mounting bracket
- 3. Feed the telephone line cord through the hole in the center of the mounting bracket
- 4. Lock the mounting bracket in place
- 5. Plug the telephone line cord into a modular wall jack, and mount the base on the wall (
- 6. Plug the power cord into an electrical outlet not controlled by a wall switch
- 7. Follow Steps 3–5 in “Table/Desktop Installation.”
- Spare Battery/Power Failure Backup
- Belt Clip
- Headset
- FEATURE SETUP – HANDSET
- FEATURE SETUP – BASE
- TELEPHONE OPERATION
- INTERCOM OPERATION
- PHONE BOOK
- CALLER ID OPERATION
- ANSWERING SYSTEM OPERATION
- BATTERIES
- IN CASE OF DIFFICULTY
- PHONE
- If the phone does not work at all, check these items first:
- If you have no dial tone:
- If you hear a long tone when you try to use the handset:
- To re-initialize the handset and base:
- If you hear noise or interference when using the phone:
- If the phone does not ring when you receive a call:
- If your telephone misdials:
- If you are unable to operate special telephone services or other equipment requiring touch tone signals:
- CALLER ID
- ANSWERING SYSTEM
- If messages are incomplete:
- If you have difficulty hearing messages:
- If callers are unable to leave messages in Mailbox 2 or 3:
- If the system does not answer after the correct number of rings:
- If CL appears in the message window:
- If the system does not respond to commands from a remote touch tone phone:
- If your outgoing announcement isn’t clear:
- PHONE
- DEFAULT SETTINGS
- TECHNICAL SPECIFICATIONS
- INDEX
- IMAGES
- 5800 manual