Kodak DC40 - Manual (Page 26)

22 January 1996
Erasing the Last Picture
If you have enabled this feature with the camera software, you will be
able to erase the last picture you took.
If you enable this feature through the camera software, the number of
images that the camera can store is reduced from 48 to 31.
1. Press the Feature button until the Current Feature Marker appears
above the Last Picture icon .
NOTE: The Last Picture icon will appear only if the erase last picture
feature is enabled through the camera software.
2. Press the top of the Select button.
The Last Picture icon will blink and the Warning icon
!
will appear
next to the Battery icon.
3. Press the top of the Select button again.
The Last Picture icon will continue to blink, and the Warning icon will
disappear. When the picture has been deleted, the camera will beep,
and the Last Picture icon will stop blinking.
NOTE: If you want to stop the camera before the picture is deleted,
press the shutter button, the Features button, or the bottom of
the Select button. If the camera has not started deleting, the
delete process will be halted.